Question

Notify Me Bookmark

The uniform 14.0-ft pole is hinged to the truck bed and released from the vertical position as the truck starts from rest with an acceleration of 2.3 ft/sec2. If the acceleration remains constant during the motion of the pole, calculate the angular velocity ω of the pole as it reaches the horizontal position. Answer: ω = rad/sec

The uniform 14.0-ft pole is hinged to the truck bed and released from the vertical position as the truck starts from rest with an acceleration of 2.3 ft/sec2. If the acceleration remains constant during the motion of the pole, calculate the angular velocity ω of the pole as it reaches the horizontal position. Answer: ω = rad/sec

Image text
The uniform 14.0-ft pole is hinged to the truck bed and released from the vertical position as the truck starts from rest with an acceleration of 2.3 f t / s e c 2 . If the acceleration remains constant during the motion of the pole, calculate the angular velocity ω of the pole as it reaches the horizontal position.
Answer: ω = ◻ r a d / s e c

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

A solid sphere with radius R = 4.00 cm has uniform density and mass m = 1.88 kg. It is released from rest at the top of an incline as shown. The coefficients of friction between the sphere and the slope are: μs = 0.50 and μk = 0.30. a) Find the linear acceleration of the sphere down the slope using Newton's 2nd law (hint: look at linear & rotational equations, since rolling uses both kinds of motion). b) What torque is produced by the frictional force? c) What is the angular velocity of the sphere when it reaches the bottom of the slope?
Solution
0 0

The truck with a ladder plotted in Fig. 5 starts from rest (and accelerates to the left) with an acceleration of 7 m/s2. The ladder of mass m = 10 kg, which is the rigid body of interest in this problem, can be modeled as a uniform slender rod that is hinged at point A and supported at point B. As a consequence, the center of mass G of the ladder is located at the midpoint of the rod. Any friction in this problem is supposed to be small enough to be neglected. a) Determine the minimum linear acceleration amin of the truck such that the ladder loses contact at point B, i. e. the normal force NB at B vanishes, and starts to rotate about point A. Do so by determining the sum of the moments about point A, and verify that for the given acceleration of the truck, the ladder will in fact lose contact at point B. b) Determine the mass moment of inertia I¯ of the ladder associated with its center of mass G. c) Use the result found in Part b) and employ the concept of relative acceleration expressed in terms of a normal-tangential coordinate system to determine the initial angular acceleration vector α of the ladder. Figure 5: A truck with a ladder accelerating from rest to the left and measurements.
Solution
0 0

Between t = 0 and t = t0, a rocket moves straight upward with an acceleration given by a(t) = A − Bt1/2, where A and B are constants. (a) If x is in meters and t is in seconds, what are the units of A and B ? (b) If the rocket starts from rest, how does the velocity vary between t = 0 and t = t0 ? (c) If its initial position is zero, what is the rocket's position as a function of time during this same time interval?

Solution
0 0